Glazing, as it is known in the building industry, is the process of installing glass in windows, doors, or any other permanent aperture. Any and all glass installed in a sash or frame, or all the glass inside the building, is referred to as glazing. Whether you are discussing a single component of a project or the project as a whole will determine how you refer to glazing.
Read More: glazing
Glazing Techniques
Dry Glazed Technique
When dry glazing, structural tapes or rubber gaskets are frequently utilized, and those components are pushed into position well in advance on both sides of the glazed part. Depending on the technique being utilized, the panels themselves are then glazed from the inside or the outside.
Wet Glazing Technique
An aluminum frame is coated with an adhesive substance, such as structural silicone, prior to the window panel being installed. It is better to perform this task indoors, where there is less chance of dust, as the silicone forms a connection between the panel and the frame. This is because any dust will hinder the adhesive’s ability to function as intended.
The method of Pointed Support Glass Systems
Since the 1960s, the pointed support glass system has performed admirably, and although minor modifications have been made, the fundamental idea has remained constant. The holes in tempered glass are used to fasten bolts through them. The disadvantage of this approach is that it is not as aesthetically pleasing and the bolts do block the view.
Cable Net Approach
The glazing technique known as cable net may be highly expensive and labor-intensive to install correctly. But the end product gives any structure a beautiful appearance and breathtaking views.
Two Skin Wall Technique
The double skin wall, a glazing technique with two glass or façade layers, is rather intricate. Warm air is produced in the area between the two layers using solar energy, and the building is subsequently vented.
Types of Glazing
Glass Float
Float glass is the term for the technique of creating big, thin, flat panels out of molten glass. The outcome is a smooth sheet with a constant thickness since these parts are floating on what is essentially a piece of tin.
Annealed Glass
The float glass that was previously discussed can get quite hot, but it can also become annealed glass if it is cooled slowly and under strict control. As a result, each piece of glass experiences less internal tension, making the sheets of glass more stronger. The one drawback of using annealed glass is that it breaks easily and often into huge, sharp fragments. If someone is unlucky enough to be at the wrong place at the wrong moment, those potentially very deadly items might cause a great deal of accidents.
Heat-Fortified Glass
In essence, heat-strengthened glass is annealed glass that has been reheated to a temperature of around 1200 degrees Fahrenheit and then carefully cooled. As a result, the durability is double that of annealed glass. Even with heat-strengthened glass, structures may still require lamination to protect people in the event that the glass breaks.
Glass Completely Tempered
Annealed glass is heated to create fully tempered glass, which cools considerably more quickly than heat-strengthened glass. As a result, the glass’s inside remains fluid for a longer amount of time than its outside. This glass is four times stronger than annealed glass because of the inner section’s fluidity. Because it breaks into tiny fragments that resemble granules, fully tempered glass is frequently employed as safety glass. This drastically lowers the chance of getting hurt.
Glass Laminated
Laminated glass consists of two or more layers of glass fused together with a layer of PVB (polyvinyl butyral) in the center. Pressure and heat are used to complete the fusion, which keeps the glass sheets from shattering. Even though some glass fragments may break into bigger bits, the PVB layer will keep those pieces together.
Connected Glass
Glass layers are held together better in wired glass than in PVB because wire mesh is positioned in between them. Because this kind of glazing prevents breaking even in the event of extreme temperatures, glass with this form of glazing is sometimes referred to as fire resistant glass.
Glass with Low Emissivity
The primary function of low emissivity glass, often known as low-e glass, is to deflect long wave infrared radiation. Usually made of silver or tin, the coating aids in maintaining a constant temperature inside the structure.
Automatic Cleaning Glass
A transparent coating is placed to self-cleaning glass, and when sunlight strikes the coating, dirt that accumulates on the window’s outside is broken down. Then every time it rains, the broken-down dirt is swept away.
For any building project you undertake, it is essential that you select the optimal glazing type and glazing process. Even if one technique could be the most effective for one structure, it might not be as effective for all the other buildings you develop. This also applies to glazing kinds, so before beginning the process, do your homework.
What you really need depends depend on how much glass you use for each job as well as your client’s preferences and requirements. You have to figure out what kind of glazing and what kind of approach would work best for them if they want a wall full of glass windows.
You have to account for the additional labor when creating your budget, even though the approach you choose might not be the simplest for you to implement. It can be quite simple to misquote glazing and end up going over budget, which is why it is crucial that you know precisely what you need to perform before you submit your proposal. Thus, before signing any contracts, make sure you are in agreement and ask questions!
With any luck, you’ve learned everything there is to know about glazing in construction and will be able to approach this aspect of the building process differently going forward. After all, if done correctly, you may help your customers save thousands of dollars on their energy expenses without sacrificing the aesthetic appeal of their properties.